Panasonic KX-TG2421AL Operating Instructions Manual

Panasonic KX-TG2421AL Operating Instructions Manual Manual pdf 40 page image

Useful Information40Error messagesIf the unit detects a problem, one of the following messages will be displayed on thehandset.*1 KX-TG2422AL onlyDisplay message Cause & solutionBusy L The called handset is in use.*1L The handset you tried to copy phonebook items to is inuse. *1L The handset you are calling is too far from the base unit. *1Error!! L When you tried to register the handset, the handset andthe base unit could not link for some reason, such asinterference from electrical appliances. Move the handsetand the base unit away from the electrical appliances andtry again.L The other handset tried to send phonebook items to youbut there was an error. Have the other handset user re-send the items to you (page 22). *1L The entered password was wrong in programming diallock. Enter the correct password.---Incomplete---Phonebook fullL When the phonebook item(s) was(were) sent to anotherhandset, the handset’s phonebook memory was full andcopying stopped. Press {OFF} to exit. Erase items fromthe other handset’s phonebook (page 21). Whenphonebook memory is available, you can copy allphonebook items (page 23) or individual items one by one(page 22). *1No link to base.Move closer tobase, try again.L The handset has lost communication with the base unit.Move closer to the base unit, and try again.L Confirm that the base unit’s AC adaptor is plugged in.L Raise the base unit antenna.L The handset’s registration may have been cancelled. Re-register the handset (page 34).Phonebook full L There is no space to store new items in the phonebook.Erase unnecessary items (page 21).No items stored L Your phonebook or redial list is empty.Please lift upand try again.L A handset button was pressed while the handset was onthe base unit or charger. Lift the handset and press thebutton again.System is busy.Please try againlater.L The handset has lost communication with the base unit.Move closer to the base unit and try again.L More than one unit is in use. Try again later. *1Dial locked L Dial lock is turned on. To turn it off, see page 34.TG2421AL_2422AL(e).book Page 40 Tuesday, March 15, 2005 6:29 PM