Panasonic KX-TG2730CS Operating Instructions Manual

Contents

“17PreparationDialing ModeIf you have touch tone service, set to “Tone”. If rotary or pulse service isused, set to “Pulse”. Your phone comes from the factory set to “Tone”.Make sure the base unit and the handset are not being used.1 Press (CONF/FUNCTION).2 Scroll to “Initial setting” by pressing(›) or (‹).3 Press (fl).4 Scroll to “Set tel line” by pressing (›)or (‹).5 Press (fl).6 Press (fl) at “Set dial mode”.≥The current setting is displayed.7 Select “Pulse” or “Tone” by pressing (›)or (‹).8 Press the right soft key ( ).≥A beep sounds.≥To exit the programming mode, press (OFF).≥You can exit the programming mode at any time by pressing (OFF).SAVESet dial mode:Tone43Room monitor1Set tel lineSet answering---------------1Save directoryRinger settingCopy directory1Initial setting2Way radio mode---------------1LCD contrastAuto talk---------------1Set dial modeSet flash timeSet dial mode:PulseS A V ESet dial mode:Pulse43 S A V E