Panasonic KX-TG2730CS Operating Instructions Manual

Contents

81Answering System“Remote CodeThe remote code prevents unauthorized people from accessing your unitand listening to your messages. Choose any 2-digit number (00–99).The factory preset remote code is “11”. If you do not program your ownremote code, you can use “11”.Make sure the base unit and the handset are not being used.1 Press (CONF/FUNCTION).2 Scroll to “Initial setting” by pressing(›) or (‹), and press (fl).3 Scroll to “Set answering” by pressing(›) or (‹), and press (fl).4 Scroll to “Remote code” by pressing (›)or (‹).5 Press (fl).≥The current setting is displayed.6 Enter a remote code using a 2-digitnumber (00–99).7 Press the right soft key ( ).≥A beep sounds.≥If 3 beeps sound, the entered remote code is the same as the password(p. 71). Start again from step 6 and select another code.≥To exit the programming mode, press (OFF).≥You can exit the programming mode at any time by pressing (OFF).To check the remote codeRepeat steps 1 to 5.≥The remote code is displayed. When finished, press (OFF).SAVERemote code:1143 S A V ESet tel line1Set answeringSet base unitCopy directory1Initial setting2Way radio modeRecording time1Remote codeSet mailbox2&3Remote code:3543 S A V E