77Answering SystemRemote Operation with the Handset “You can access the mailboxes fromyour handset and listen tomessages. If “ ” flashes on thehandset, there are new messagesin the mailboxes. Concerning newmessage indications on the baseunit, see page 73.PLAYTo listen to messages1 Press the right soft key ( ).≥A beep sounds and “Please select Mailbox” willbe heard from the speaker. To switch to thereceiver, press . To switch back to thespeaker, press .≥The mailboxes that have new messages willflash.2 Press (#)(1) (Mailbox 1), (#)(2) (Mailbox 2)or (#)(3) (Mailbox 3).≥If “Enter Mailbox password” is announced anddisplayed, Mailbox 2 or 3 has the password.Enter the password (p. 71).≥“Mailbox (No.)” and the number of newmessages will be announced, and new messages will be played.≥To play all messages in the mailbox, press (5).≥You can enter the desired direct commands for other functions (p. 79).≥If you do not enter a command, the voice menu will start (p. 78).3 To end remote operation, press (OFF).PLAYRemote operation#,1=Mailbox1#,2=Mailbox2#,3=Mailbox3PLAY(OFF)Soft Key( )PLAYe.g. New messages exist.e.g. Mailbox 1 has newmessages.≥To adjust the speaker or receiver volume, press (‹) to increase and press (›)to decrease.≥If you do not select a mailbox in step 2, the number of new messages in Mailbox1 will be announced, and new messages will be played.SP PRIVACY [1]Received callss4P L A Y
