Panasonic KX-TG2730CS Operating Instructions Manual

Contents

To monitor with the handset1 Press (HOLD) (INTERCOM).2 Press the right soft key ( ).3 To call the base unit, press (0).To call another handset (when the systemhas additional handsets, p. 28):Enter the extension number using thedialing button ((1) to (8)).≥Your handset will start to monitor the room through the destination unit and“Room monitor” will be displayed.≥To monitor from the speaker, press . You can place the handset on thecharger but you cannot place it on the base unit to continue monitoring.Placing the handset on the base unit will disconnect room monitoring. Toswitch back to the receiver, press .≥The LOCATOR/INTERCOM/TRANSFER indicator flashes and the DIGITALSP-PHONE indicator lights on the monitored base unit or “Room monitor”will be displayed on the monitored handset.4 To end monitoring, press (OFF) or place thehandset on the base unit.≥The base unit user can stop being monitored by pressing(LOCATOR/INTERCOM/TRANSFER) or (DIGITAL–SP-PHONE). The monitoredhandset user can stop being monitored by pressing (OFF).≥If the Room Monitor feature of the destination unit is off or the destination handsetis on the base unit, “Denied” will be displayed and busy tones will sound.MONITOR59Cordless TelephoneTo monitor with the base unit1 Press (LOCATOR/INTERCOM/TRANSFER), and press (MUTE).≥The LOCATOR/INTERCOM/TRANSFER indicator light flashes.2 To call the handset, enter the extension number using the dialingbutton ((1) to (8)).≥The base unit will start to monitor the room through the handset.≥The handset will display “Room monitor”.3 To end monitoring, press (LOCATOR/INTERCOM/TRANSFER) or(DIGITAL–SP-PHONE).≥The LOCATOR/INTERCOM/TRANSFER indicator light goes out.≥The monitored handset user can stop being monitored by pressing (OFF).≥If the Room Monitor feature of the destination handset is off or the handset is onthe base unit, busy tones will sound.SP PRIVACY [1]Press extension#to callMONITO RRoom monitor01Press extension#for room monitor