18Programmable SettingsProgramming GuidelinesThis unit has various programmable functions. Most of them are selectedfrom the function menu on the display (p. 22).Base Unit HandsetHow to select a function item from the menu1. Press (FUNCTION) while in the standby mode. The main menu isdisplayed.2. You can scroll through the menu bypressing or . Find the desireditem and point the arrow to the itemby pressing or .3. Press H to select the item.4. If the selected item has a sub-menu, it will be displayed. Select the sub-menu item by pressing or , and press H.5. You can then select the desired setting.• (ENTER) is used to select or save a programming setting.6. When programming is complete, a confirmation tone sounds. Thedisplay will return to the main menu or the sub-menu (if the function itemis in the sub-menu). You can continue programming other items. Toreturn to the standby mode, press (EXIT).Useful information:• You can go back to the previous display by pressing I except when enteringcharacters or numbers. To return to the main menu from the sub-menu, press I.• You can exit the programming mode any time by pressing (EXIT).• If you do not press any buttons for 60 seconds, the unit will return to the standbymode.• If the unit detects a problem, an error message will be displayed (p. 92).Ex. “Ringer setting” is at the arrow.S a v e d i r e c t o r yD a t e a n d t i m eHR i n g e r s e t t i n gBase Unit(FUNCTION)(EXIT)(ENTER)Navigator Key( , , H, I) (FUNCTION/EXIT)(ENTER)Navigator Key( , , H, I)
