37Chapter 2 Basic Operation1 Press I or H to enter the directory.2 Press or to find the directory item you want to edit.• To search for the item by initial, see page 36.E n t e r n a m e :J a n e W a l k e rIH E N T E R = N e x t1 2 3 4 5 6 7E N T E R = S a v e0 9 8 1 2 3 4 5 6 7E N T E R = S a v eEditing an Item in the DirectoryMake sure that the base unit/cordless handset is in the standby mode.E n t e r n a m e :J a n eIH E N T E R = N e x t3 Press (EDIT).• If you do not need to change the name,go to step 5.4 Edit the name using the dialingbuttons, up to 16 characters (p. 35).• To move the cursor, press I or H.5 Press (ENTER).• If you do not need to change thenumber, go to step 7.6 Add a number to the current number.• Pressing (CLEAR) erases the digit to theleft of the cursor. To erase all digits,press and hold (CLEAR).7 Press (ENTER).• A beep sounds.• To edit other items, start again from step 2.• To return to the standby mode, press (EXIT).Erasing an Item in the DirectoryMake sure that the base unit/cordless handset is in the standby mode.1 Press I or H to enter the directory.2 Press or to find the directory item you want to erase.• To search for the item by initial, see page 36.3 Press (CLEAR).• To stop erasing, press I.4 Press (ENTER).• A beep sounds and “Clear” is displayed.• To erase other items, start again from step 2.• To return to the standby mode, press (EXIT).• To erase all items in the directory, see page 54.C l e a r ?I= N o E N T E R = Y e s
