Panasonic KX-TG5561 Operating Instructions Manual

Also see for KX-TG5561: Operating instructions Operating instructions Operating instructions Quick guide

Contents

Panasonic KX-TG5561 Operating Instructions Manual Manual pdf 37 page image

Intercom FeaturesFor assistance, please visit http://www.panasonic.com/consumersupport 37IntercomIntercom calls can be made between thehandset and the base unit, and betweenthe included handset and a compatiblePanasonic handset (page 6).Call the desired unit by selecting theextension number (! to )), shown in theupper right of each handset’s display. Thebase unit’s extension number is 0.Note:L If you have difficulty hearing the otherparty while using the speaker, decreasethe speaker volume.L If you receive a phone call while talkingon the intercom, you will hear 2 tones(page 56, 58). To answer the call with thehandset, press {OFF}, then press {C}or {s}. To answer the call with the baseunit, press {SP-PHONE} 2 times.L You cannot change the ringer tone forintercom calls.From the handset to the base unit1 Handset:Press {INTERCOM}, then press {0}.L The base unit will beep for 1 minute.L To stop paging, press {OFF}.2 Base unit:Press {SP-PHONE} or {INTERCOM}to answer the page.3 Handset:When finished talking, press {OFF}.Note:L During an intercom call, the handsetuser can switch to the speaker bypressing {s}. To switch back to thereceiver, press {C}.From the base unit to a handset1 Base unit:Press {INTERCOM}.2 To page a specified handset, press itsextension number ({1} to {8}).ORTo page all handsets, press {0}.L The handset(s) will beep for 1 minute.L To stop paging, press {SP-PHONE}or {INTERCOM}.3 Handset:Press {C}, {s}, or {INTERCOM} toanswer the page.4 Base unit:When the paged party answers, speakinto the MIC.5 Base unit:When finished talking, press {SP-PHONE} or {INTERCOM}.Note:L You can locate a misplaced handset bypaging it. (Handset locator)L If you page all handsets, only thehandset user who answers first can talkwith the base unit.From one handset to another handsetExample: When handset 1 calls handset 2.1 Handset 1:Press {INTERCOM}, then press thehandset’s extension number {2}(desired handset number).L The paged handset will beep for 1minute.L To stop paging, press {OFF}.2 Handset 2:Press {C}, {s}, or {INTERCOM} toanswer.3 When finished talking, press {OFF}.TG5561_5566.book Page 37 Thursday, April 7, 2005 12:07 PM