Panasonic KX-TG5561 Operating Instructions Manual

Also see for KX-TG5561: Operating instructions Operating instructions Operating instructions Quick guide

Contents

Panasonic KX-TG5561 Operating Instructions Manual Manual pdf 57 page image

Programmable SettingsFor assistance, please visit http://www.panasonic.com/consumersupport 575 Press {SAVE} or {GUARDAR}, thenpress {OFF}.Note:L If you select a language you cannotread, press {MENU} {#} {1} {1} {0}{1} {SAVE} to change the displaylanguage to English.Flash timeThe flash time depends on your telephoneexchange or host PBX.You can select: “90ms” (milliseconds),“100ms”, “110ms”, “250ms”, “300ms”,“400ms”, “600ms”, or “700ms”.1 Press {MENU} (center of joystick).2 Scroll to N, then press {SELECT}.3 Scroll to “Set tel line”, then press{SELECT}.4 Scroll to “Set flash time”, thenpress {SELECT}.5 Push the joystick up or down repeatedlyto select the desired setting.6 Press {SAVE}, then press {OFF}.Note:L The setting should stay at 700 ms unlesspressing the soft key {FLASH} fails topick up the Call Waiting call.L If the unit is connected via a PBX, certainPBX functions (call transferring, etc.)may not work correctly. Consult yourPBX supplier for the correct setting.Line modeThe line mode is preset to “B” andgenerally should not be adjusted. IfS on the handset is not displayedand the IN USE indicator on the base unitdoes not light properly when anotherphone connected to the same line is inuse, the line mode selection is incorrect.Set line mode to “A”.1 Press {MENU} (center of joystick).2 Scroll to N, then press {SELECT}.3 Scroll to “Set tel line”, then press{SELECT}.4 Scroll to “Set line mode”, then press{SELECT}.5 Push the joystick up or down repeatedlyto select the desired setting.6 Press {SAVE}, then press {OFF}.Base unit settingsThese features can be set by using thehandset.Base unit ringer volumeYou can also adjust the base unit ringervolume from the base unit (page 26).1 Press {MENU} (center of joystick).2 Scroll to N, then press {SELECT}.3 Scroll to “Set base unit”, then press{SELECT}.4 Scroll to “Ringer volume”, then press{SELECT}.5 Push the joystick up or down repeatedlyto select the desired volume.L To turn the ringer off, push the joystickdown repeatedly until “Off ?” isdisplayed.6 Press {SAVE}, then press {OFF}.TG5561_5566.book Page 57 Thursday, April 7, 2005 12:07 PM