*18 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Make sure the unit’s date and time settingis correct (page 16).1 MMENUN#7202 MbN: Select the desired alarm. aMSELECTN3 MbN: Select the desired alarm option. aMSELECTN“Off”Turns alarm off. Go to step 10.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.“Weekly”Alarm sounds weekly at the set time(s).4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired month and date. aMOKNn Weekly:MbN: Select the desired day of the weekand press MSELECTN. a MOKN5 Set the desired time.6 *: Select “AM” or “PM”. a MOKN7 Enter a text memo (10 characters max.).a MOKN8 MbN: Select the desired alarm tone. aMSELECTNR We recommend selecting a differentringer tone from the one used foroutside calls.9 MbN: Select the desired snooze setting.a MSAVEN10 MSELECTN a MOFFNNote:R Press MSTOPN to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key or MSNOOZEN to stopthe sound but keep the snooze functionactivated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Silent modeSilent mode allows you to select a period oftime during which the handset and/or baseunit will not ring for outside calls. This featureis useful for time periods when you do notwant to be disturbed, for example, whilesleeping. Silent mode can be set for each unit.Using the phonebook’s group feature(page 35), you can also select groups ofcallers whose calls override silent mode andring the unit (Caller ID subscribers only).Important:R Make sure the unit’s date and time settingis correct (page 16).R We recommend turning the base unit ringeroff (page 40, 42) in addition to turning thesilent mode on. (KX-TGE460 series: page 4)46 For assistance, please visit http://shop.panasonic.com/supportProgrammingTGE46x47x(en)_1117_ver061.pdf 46 2015/11/17 15:14:15