Panasonic KX-TGF350C Operating Instructions Manual

4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNListening to messagesAfter you answer the new message alert, you canlisten to the messages as follows.n When the remote access code is set to“Inactivate”:Press 4 to play the new message during theannouncement.n When the remote access code is set to“Activate”:1 Enter the remote access code (page 44)during the announcement.2 Press 4 to play the new message.Note:R Within 10 seconds after listening to newmessages, you can press #9 during the callto turn off the new message alert by a callfeature.R Even if the unit makes a new message alert call,the handset redial list does not show the record.However, on the base unit redial list it is shownas “Message alert”.Remote operationUsing a touch-tone phone, you can call yourphone number from outside and access the unit tolisten to messages or change answering systemsettings. The unit’s voice guidance prompts you topress certain dial keys to perform differentoperations.Remote access codeA 3-digit remote access code must be enteredwhen operating the answering system remotely.This code prevents unauthorized parties fromlistening to your messages remotely. The defaultsetting is “111”.You can configure this setting using either thebase unit or one of the handsets.Important:R To prevent unauthorized access to this product,we recommend that you regularly change theremote code.Handset / Base unit1 MMENUN#3062 Enter the desired 3-digit remote access code.3 MSAVEN4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNDeactivating remote operationPress * in step 2 on “Remote access code”,page 44.R The entered remote access code is deleted.Using the answering system remotely1 Dial your phone number from a touch-tonephone.2 After the greeting message starts, enter yourremote access code.3 Follow the voice guidance prompts asnecessary or control the unit using remotecommands (page 44).4 When finished, hang up.Voice guidanceDuring remote operation, the unit’s voice guidancestarts and prompts you to press 1 to perform aspecific operation, or press 2 to listen to moreavailable operations.Note:R If you do not press any dial keys within 10seconds after a voice guidance prompt, the unitdisconnects your call.Remote commandsYou can press dial keys to access certainanswering system functions without waiting for thevoice guidance to prompt you.Key Operation1 Repeat message (during playback)*12 Skip message (during playback)4 Play new messages5 Play all messages9 Stop playback0 Turn answering system off44 For assistance, visit www.panasonic.ca/english/supportAnswering SystemTGF3xxC(en)_1216_ver011.pdf 44 2014/12/16 19:11:02