When you use the landline againBefore connecting the telephone line to thebase unit, select “Off” in step 2, “Mobile lineonly mode (If you do not use the landline)”,page 18.Mobile line selectionThis feature determines which mobile line isselected to make mobile calls when:– you press MMOBILEN on the handset.– you press M N or MZN on the handsetwhile the mobile line only mode is turned on.– you press MZN on the base unit while themobile line only mode is turned on.The following settings are available:– “Manual” (handset only: default): You canselect the desired mobile line when makinga call.– “Mobile phone 1”*1 (base unit default):MOBILE 1 is selected.– “Mobile phone 2”*1: MOBILE 2 isselected.Handset / Base unit1 MMENUN#6342 MbN: Select the desired setting. aMSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITN*1 After the Bluetooth device is paired, thedevice name is displayed.Storing your area code (for localcall)You need to add your area code when makingmobile calls to a phone number in your area.Once you store your area code, it isautomatically added to the beginning of the7-digit phone number when making mobilecalls.Handset1 MMENUN#6332 Enter the 3-digit area code.R To correct a digit, press MCLEARN.3 MSAVEN a MOFFNChanging the Bluetooth PIN(Personal Identification Number)The PIN is used to pair mobile phones to thebase unit. The default PIN is “0000”. Toprevent unauthorised access to this product,we recommend that you change the PIN, andkeep it confidential.Important:R Please make note of your new PIN. Theunit does not reveal the PIN to you. If youforget your PIN, see page 77.Handset1 MMENUN#619R If the unit prompts you to enter the oldPIN (when the default has beenchanged), enter the current 4-digit PIN.2 Enter the new 4-digit PIN. a MOKN3 Enter the new 4-digit PIN again. aMSAVEN4 MOFFN19Link to MobileTGF372AZ(en)_0519_ver003.pdf 19 2015/05/19 9:28:44