Panasonic KX-TGF372AZ Operating Instructions Manual

Also see for KX-TGF372AZ: Operating instructions

Contents

Panasonic KX-TGF372AZ Operating Instructions Manual Manual pdf 51 page image

Answering the baby monitorn When monitoring with a unit:Handset: Press M N to answer a call.Base unit: Press MZN to answer a call.If you want to respond from the monitoringunit, press MMUTEN.R The monitoring unit will answer callsautomatically when the auto intercomfeature is set to “On” (page 30).Note:R If you receive an outside call whencommunicating with the monitoredhandset, the interrupt tone sounds.– To answer the call with the handset,press MOFFN, then press M N.– To answer the call with the base unit,press MZN 3 times.*1*1 If MMUTEN is pressed, press MZN 2times.n When monitoring from an outside line:Answer the call.If you want to respond from your monitoringphone, press #1 using tone dialling.You can turn off the baby monitor featureby pressing #0.Note:R The unit disconnects the callautomatically after 2 minutes.Other programmingChanging the handset nameThe default handset name is “Handset 1” to“Handset 6”. You can customize the nameof each handset (“Bob”, “Kitchen”, etc.). This isuseful when you make intercom calls betweenhandsets. To display the handset name instandby mode, turn on the handset namedisplay feature (page 51).Handset1 MMENUN#1042 Enter the desired name (10 charactersmax.).3 MSAVEN a MOFFNDisplaying the handset nameYou can select whether or not the handsetname is displayed in standby mode. Thedefault setting is “Off”.Handset1 MMENUN#1052 MbN: Select the desired setting. aMSAVEN a MOFFNChanging the unit’s regionsetting/Resetting the base unit1 MMENUN#1362 MbN: Select the desired country. aMSELECTN“Australia” = Australia“New Zealand” = New Zealand3 MbN: “Yes” a MSELECTN a MOFFNNote:R Changing the unit’s region setting maycause the settings for your country or yourcustomised settings to return to their defaultsettings.Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered to thebase unit.Important:R See page 4 for information on the availablemodel.Registering a handset to thebase unitThe supplied handset and base unit arepre-registered. If for some reason the handset51ProgrammingTGF372AZ(en)_0519_ver003.pdf 51 2015/05/19 9:28:45