Panasonic KX-TGF372AZ Operating Instructions Manual

Also see for KX-TGF372AZ: Operating instructions

Contents

Panasonic KX-TGF372AZ Operating Instructions Manual Manual pdf 47 page image

*3 When the mobile line only mode is turned on, these menus are not displayed (page 18).*4 After the Bluetooth device is paired, the device name is displayed.*5 For MOBILE 1*6 For MOBILE 2*7 The preset melodies in this product (“Tone 3” - “Melody 10”) are used with permission of© 2009 Copyrights Vision Inc.*8 The preset melodies in this product (“Tone 1” and “Tone 2”) are used with permission of© 2013 Copyrights Vision Inc.*9 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID auto”. To turn this feature off, select“Manual”. (Caller ID subscribers only)To use this feature, set the date and time first (page 15).*10 If you subscribe to a distinctive ring service, select a tone. If you select a melody, you cannotdistinguish lines by their ringers.*11 This tone lets you know when you receive an outside call while you are on another line or anintercom call. If you select “On”, the tone sounds 2 times.*12 This setting is available when you have the key finder (KX-TGA20AZ). Read the installationmanual for more information on the key finder.*13 For models with supplied key finders, the display shows “1: Finder1”.*14 If you register 2 or more key finders.*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*16 The recall time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*17 The default setting will be as follows if you select the following regional code when changingthe unit’s region setting (page 51):“NewZealand” = “600 ms”*18 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.*19 This setting is available when a mobile phone is paired.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Make sure the unit’s date and time settingis correct (page 15).Handset1 MMENUN#7202 MbN: Select the desired alarm. aMSELECTN3 MbN: Select the desired alarm option. aMSELECTN“Off”Turns alarm off. Go to step 10.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.47ProgrammingTGF372AZ(en)_0519_ver003.pdf 47 2015/05/19 9:28:45