Panasonic KX-TGF372AZ Operating Instructions Manual

Also see for KX-TGF372AZ: Operating instructions

Contents

Panasonic KX-TGF372AZ Operating Instructions Manual Manual pdf 59 page image

You can configure this setting using either thebase unit or one of the handsets.Handset / Base unit1 For MOBILE 1: MMENUN#6031For MOBILE 2: MMENUN#60322 MbN: Select the desired setting. aMSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNSelecting the alert toneHandset1 For MOBILE 1: MMENUN#6041For MOBILE 2: MMENUN#60422 MbN: Select the desired setting.3 MSAVEN a MOFFNTemporary alert offYou can temporarily disable the alerts bypressing MAPP ALERTSN.Base unitPress MAPP ALERTSN to temporarily disablealerts.R is displayed.R To enable alerts again, press MAPPALERTSN again.Using a Bluetooth wirelessheadset (optional) forlandline callsBy pairing a Bluetooth headset to the baseunit, you can have a hands-free conversationwirelessly for landline calls.Important:R Your Bluetooth wireless headset mustsupport the HeadSet Profile (HSP)specification.R 1 headset can be paired to the base unit.R Only 2 Bluetooth devices can be used withthe unit at the same time (for example, 2mobile lines, or the headset and 1 mobileline).R For best performance, we recommendusing a Bluetooth headset within 1 m of thebase unit. A headset can communicate withthe base unit within a range ofapproximately 10 m.Pairing a headset to the base unitImportant:R Make sure that the Bluetooth headset is notconnected to any other Bluetooth device.1 Your headset:Set your headset to pairing mode.R Refer to the headset operatinginstructions.2 Handset:MMENUN#6213 If your headset PIN is “0000”, go tostep 4.If your headset PIN is other than“0000”, press MCLEARN, then enter yourheadset PIN.R Typically, default PIN is “0000”. Referto the headset operating instructions.4 Press MOKN, then wait until a long beepsounds.5 MOFFNR When is displayed on the baseunit, the headset is available for use.Connecting/disconnecting a headsetIf you cannot connect the headset and baseunit using the headset, you can connect usingthe handset.To use your headset with another Bluetoothdevice such as a mobile phone, you may needto disconnect it from the base unit.Important:R Make sure that the headset is turned on.Handset1 To connect/disconnect:MMENUN#622R A long beep sounds.2 MOFFN59Using Bluetooth® DevicesTGF372AZ(en)_0519_ver003.pdf 59 2015/05/19 9:28:46