3. Click OK.[Deleting a Call Routing Service]1. Select the desired Caller ID/DID/PIN number.2. Click Delete.3. Click Yes.[Editing a Call Routing Service]1. Select the desired Caller ID/DID/PIN number.2. Click Edit....3. Edit parameters in the Edit Parameters dialog box.4. Click OK.Note• DID setting is only available when the VPS is connected to one of the following PBXs using DPTIntegration.– KX-TD816 (P311Q or higher)– KX-TD1232 (P211Q or higher)– KX-TD500 (V4M or higher)– KX-TDE series– KX-TDA series*1 (MPR Version 1.1 or higher)*1 except KX-TDA502.4.1.1 Caller ID No./DID No./PIN No.Caller ID No./DID No./PIN No.Specifies Caller ID/DID/PIN numbers so that callers are automatically forwarded to a preprogrammeddestination. The wild card " " can also be entered (see 2.4.1 Caller ID/DID/PIN Call Routing for examples).For Caller ID numbers, "Private" and "Out of Area" callers can be specified.DefaultNoneValue RangeMax. 20 digits consisting of 0–9 and " ""Private" and "Out of Area" can also be assigned for Caller ID numbersFeature Manual References2.2.8 Caller ID Call Routing (APT/DPT Integration Only)2.2.19 DID Call Routing (DPT Integration Only)2.2.38 PIN Call RoutingDescriptionSpecifies a name and/or description of the Caller ID/DID/PIN number.Note• When no data is specified in this parameter, the caller’s name will be automatically entered here if thecaller’s name is received from the telephone company.100 Programming Manual Document Version 3.0 2010/062.4.1 Caller ID/DID/PIN Call Routing
