EFA Transfer Reconnect Sequence on No AnswerSpecifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (ExternalFeature Access) does not answer. This setting should match the settings of the PBX.DefaultF 60TNValue RangeMax. 16 digits consisting of 0–9, , # and special codesD: DisconnectingF: Flash (Recall)R: Ringback Tone DetectionT: Dial Tone Detection,: Dial Pause for 1 s (default);: Dial Pause for 3 s (default)N: Telephone Number Dialing0–9, , #: Dial CodesCall Transfer to Outside Answer ModeSpecifies the answering method the VPS uses to detect whether the destination party has answered thetransferred trunk (CO line) call.DefaultGuidanceValue RangeAnalyze: the VPS monitors the status of the trunk (CO line), recognizes that the destination party goes off-hook,and connects the line.Guidance: the VPS plays the following guidance before connecting the line to the destination party: "You havea call. To answer the call, press [1]. Otherwise, press [2] and hang up." If the destination party presses "1", heor she will be able to answer the transferred trunk (CO line) call. The VPS continues playing this guidance forthe time specified in "Outgoing Call No Answer Time" in "Dialling Parameters". If the transferred party doesnot answer the call within this time, the VPS considers it as a No Answer call.Feature Manual References2.2.7 Call Transfer to OutsideIgnore Received First DTMFIf the PBX sends a DTMF signal to the VPS when the VPS attempts to transfer a call to an outside telephone,set this parameter to "Enable".DefaultEnableValue RangeDisable, EnableDocument Version 3.0 2010/06 Programming Manual 1792.5.4 Parameters
