Value Range0 s–60 sTime FrameSpecifies the start and end times for each time mode for each day of the week. Each day of the week can have1 lunch mode, up to 2 night modes (1 at the beginning and end of the day) and up to 3 break modes. Lunchand break modes can only be inserted into a day mode.Follow the steps below to edit the time frame.1. Click Click to edit....2. Select a time mode, then enter the start and end times in the "Start At:" and "End At:" fields or drag theedges of the time mode to mark the start and end times.To copy the time mode schedule of one day to another day1. Select a time mode in the desired "copy from" day, and click Copy.2. Select a time mode in the desired "copy to" day, then click Paste.To insert a break or lunch mode1. Right-click the desired day mode.2. Select "Insert Break" or "Insert Lunch".3. Click OK.Note• This setting is only available when "Automatic" is selected in "Service Mode".DefaultDay: 09:00-17:00Night: 00:00-09:00, 17:00-24:00Lunch: NoneBreak: NoneValue Range00:00–24:00Feature Manual References2.2.46 Time ServiceCaller ID/DID Call RoutingEnables or disables the Caller ID/DID Call Routing feature.DefaultEnableValue RangeDisable, EnableFeature Manual References2.2.8 Caller ID Call Routing (APT/DPT Integration Only)2.2.19 DID Call Routing (DPT Integration Only)96 Programming Manual Document Version 3.0 2010/062.3.1 Service Group
