Follow the steps below for LAN Settings:1. Click Utility in the menu bar.2. Select LAN Settings.3. Edit parameters in the LAN Settings dialog box.4. To change the port number, click Advanced Settings, otherwise click OK to finish.5. Enter the port number that will be used when connecting to the VPS via the KX-TVA MaintenanceConsole, then click OK.6. Click OK.Note• The port number setting is used for both LAN and modem connections to the VPS.• Consult the LAN administrator for the appropriate settings.• The VPS must be restarted after these settings are changed in order for them to take effect.Automatic or manual IP address assignmentIf the VPS is connected to a network with a DHCP server, you can program the VPS to receive an IP addressautomatically.Obtain an IP address automaticallyCheck this item to have the VPS obtain an IP address automatically from the local network’s DHCP server.DefaultNot checkedUse the following IP address:Check this item if you want to assign a specific IP address, subnet mask, and default gateway to the VPS.DefaultCheckedIP AddressSpecifies the IP Address for the VPS. You can program this setting only if Use the following IP address: isselected.Default192.168.1.11Subnet MaskSpecifies the Subnet Mask for IP Address. You can program this setting only if Use the following IPaddress: is selected.Default255.255.255.036 Programming Manual Document Version 3.0 2010/061.9.13 Utility—LAN Settings
