4.3.7.1 HTTP Client SettingsHTTP VersionDescription Selects which version of the HTTP protocol to use for HTTPcommunication.Value Range • HTTP/1.0• HTTP/1.1Note• For this unit, it is strongly recommended that you select [HTTP/1.0]. However, if the HTTP server does not function well withHTTP/1.0, try changing the setting [HTTP/1.1].Default Value HTTP/1.0Configuration File Reference HTTP_VER (Page 279)HTTP User AgentDescription Specifies the text string to send as the user agent in the header of HTTPrequests.Value Range 1-64 charactersNote• You cannot leave this field empty.• If "{mac}" is included in this field, it will be replaced with theunit’s MAC address in lower-case.• If "{MAC}" is included in this field, it will be replaced with theunit’s MAC address in upper-case.• If "{MODEL}" is included in this field, it will be replaced with theunit’s model name.• If "{fwver}" is included in this field, it will be replaced with thefirmware version of the unit.Default Value Panasonic_{MODEL}/{fwver} ({mac})Configuration File Reference HTTP_USER_AGENT (Page 279)4.3.7.2 HTTP AuthenticationAuthentication IDDescription Specifies the ID for the User account. If set, this name must be enteredto access the Web user interface at the User access level.Value Range Max. 127 charactersDefault Value Not stored.110 Administrator Guide Document Version 2015-014.3.7 HTTP Client Settings
