4.5.3.4 Jitter BufferMaximum DelayDescription Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.Value Range 3–50 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be greater than [Initial Delay]– This value must be greater than [Minimum Delay]– [Initial Delay] must be greater than or equal to [MinimumDelay]Default Value 20 (´ 10 ms)Configuration File Reference MAX_DELAY (Page 322)Minimum DelayDescription Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.Value Range 1 or 2 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be less than or equal to [Initial Delay]– This value must be less than [Maximum Delay]– [Maximum Delay] must be greater than [Initial Delay]Default Value 2 (´ 10 ms)Configuration File Reference MIN_DELAY (Page 323)Initial DelayDescription Specifies the initial delay, in 10-millisecond units, of the jitter buffer.Value Range 1–7 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be greater than or equal to [MinimumDelay]– This value must be less than [Maximum Delay]Default Value 2 (´ 10 ms)Configuration File Reference NOM_DELAY (Page 323)Document Version 2015-01 Administrator Guide 1354.5.3 VoIP Settings [Line 1]–[Line n]
