[Dial Plan Flowchart]When a user dials a single digit on a unit, the following sequence of events begins.AA user dials a single digit on the unit.The unit stores each digit dialed before theinter-digit timer expires.The unit compares the dialed digits with each dialplan when the inter-digit timer expires.Do the dialed digits fully orpartially match in the dial plan?YesYesNoYesYesYesNo No MatchNoYesNoToNoComplete Match Partial MatchDoes the dialplan contain "!"for numberbarring?Does the dial plancontain "." for elementrepetition?Has [Call EvenIf Dial Plan DoesNot Match] been setto [Yes]?The call is initiated.The call is denied.Does the dialed number ofdigits exceed the numberof digits up to 2 charactersbefore "." in the dial plan?The call is denied.The call is initiated.Does the dial plan include asubstitution rule and do thedialed digits match it? AThe number is substituted.Does the user press[ENTER] or the # key?YesNoNoYesBThe inter-digit timer starts.To BTo ADoes the user press[ENTER] or the # key?No6.2.1 Dial Plan SettingsTo set Dial Plan1. In the Web user interface, click the [Telephone] tab, and then click [Call Control [Line 1]–[Line n]].2. In [Dial Plan], enter the desired dial format.The dial plan settings can be configured for each line separately.Document Version 2015-01 Administrator Guide 3716.2.1 Dial Plan Settings
