Default Value Not stored.Configuration File Reference FWD_UNCONDITIONAL_NUMBER (Page 331)Busy (Enable Call Forward)Description Selects whether to forward incoming calls to a specified destinationwhen the line is in use.Note• If Do Not Disturb has been enabled on the server, the serverrejects incoming calls and the unit does not receive any calls,even if you have selected [Yes] for this setting.• If you have selected [Yes] for this setting and Call Forward hasbeen enabled on the server, but the forwarding destinationsdiffer, incoming calls are forwarded to the destination set on theserver.• If Call Forward has been enabled on the server, incoming callsare forwarded to the destination set on the server, even if youhave selected [No] for this setting.• You can synchronize the Do Not Disturb and Call Forwardsettings from the Web user interface (® see [Feature KeySynchronization] in 4.6.2.1 Call Control) or throughconfiguration file programming (® see"FEATURE_KEY_SYNCHRO_ENABLE" in 5.9.2 Per Line - CallControl Settings).• If you change this setting when [Feature KeySynchronization] is set to [Yes], the change to this setting isnot immediately applied on this screen. In this case, reload thescreen to confirm that the change is applied.Value Range • Yes• NoDefault Value NoConfiguration File Reference FWD_BUSY_ENABLE (Page 332)Busy (Phone Number)Description Specifies the phone number of the destination to forward calls to whenthe line is in use.Note• If you change this setting when [Feature KeySynchronization] is set to [Yes], the change to this setting isnot immediately applied on this screen. In this case, reload thescreen to confirm that the change is applied.150 Administrator Guide Document Version 2015-014.6.2 Call Control [Line 1]–[Line n]
