3.1.3 Port Mirroring SettingsPort mirroring is used for network monitoring and debugging purposes.You can enable port mirroring by performing the procedure below from the unit.To enable port mirroring1. On the Home screen, select .2. Press [#][5][9][0].3. SelectYes .3.1.4 Disabling the Touch ScreenTouch for the screen can be disabled. This is convenient when cleaning the screen.You can disable touch for the screen by performing the procedure below from the unit.To disable touch for the screen1. On the Home screen, select .2. Press [#][6][1][1].3. SelectYes .• Press [#][6][1][1] to enable the screen again.3.1.5 Exporting phone user interface settingsExporting of phone user interface settings is only available for the KX-UTG300 when it has a USB flash driveconnected to it.You can export phone user interface settings to a USB flash drive by performing the procedure below from theunit.To export phone user interface settings1. On the Home screen, select .2. Press [#][6][2][2].3. SelectYes .• If the export is successful, "Export UI Configuration Successful!" is displayed.• If the export fails, "Export UI Configuration Failed!" is displayed.66 Administrator Guide Document Version 2015-013.1.5 Exporting phone user interface settings
