Configuration File Reference MACRODIGIT_TIM (Page 288)International Call PrefixDescription Specifies the number to be shown in the place of the first "+" symbolwhen the phone number for incoming international calls contains "+".Value Range Max. 8 characters (consisting of 0–9, *, and #)Default Value Not stored.Configuration File Reference INTERNATIONAL_ACCESS_CODE (Page 289)Country Calling CodeDescription Specifies the country/area calling code to be used for comparativepurposes when dialing a number from the incoming call log thatcontains a "+" symbol.Value Range Max. 8 characters (consisting of 0–9)Default Value Not stored.Configuration File Reference COUNTRY_CALLING_CODE (Page 289)National Access CodeDescription When dialing a number from the incoming call log that contains a "+"symbol and the country calling code matches, the country calling codeis removed and the national access code is added.Value Range Max. 8 characters (consisting of 0–9, *, and #)Default Value Not stored.Configuration File Reference NATIONAL_ACCESS_CODE (Page 289)Hold Recall TimerDescription Specifies the duration of the hold recall timer. If set to "0", the functionis disabled.Value Range 0–240 (0: Disable)Default Value 60Configuration File Reference HOLD_RECALL_TIM (Page 290)Document Version 2015-01 Administrator Guide 1414.6.1 Call Control
