Panasonic KX-VC1600 User Manual

Also see for KX-VC1300: User manual Basic operation guide Basic operation gude User manual User manual

Contents

Panasonic KX-VC1600 User Manual Manual pdf 109 page image

Setting One-touch ConnectionNumbersSet the addresses or profiles assigned to the one-touchconnection numbers (1 to 5) displayed on the homescreen.1. Select "One-Touch Set." and press [ENTER].• The one-touch connection number settingsscreen is displayed.2. Use [ ][ ] to select ""Not Registered"".3. Press [B].• A dialogue box is displayed for selecting whichkind of input method to reference.4. Use [ ][ ] to select the reference source,"Contact list" or "Profile" and press [ENTER].When "Contact list" is selected:The contact list selection screen is displayed.1. Use [ ][ ] to select the other party toregister, and press [ENTER].• The one-touch connection number settingsscreen is displayed.When "Profile" is selected:The profile list reference screen is displayed.1. Use [ ][ ] to select the group name you wantto register and press [ENTER].• The one-touch connection number settingsscreen is displayed.5. Press [G].• A dialogue box to confirm the saving of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [ENTER].• The system settings screen is displayed.Making Screen StandbySettingsWhen the remote control is not operated or a videoconference call is not received for a specified length oftime, the unit enters standby mode. You can set thelength of time here.1. Select "Standby Setting" and press [ENTER].• The screen standby settings screen isdisplayed.2. Enter the length of time (0–99) in minutes until theunit enters screen standby mode (default: 10).Note• If you set "0", the unit will not enter screenstandby mode automatically. However, ifyou press the remote control’s[STANDBY] button, the unit will enterscreen standby mode even if "0" is set.3. Press [G].• A dialogue box to confirm the saving of settingsis displayed.4. Use [ ][ ] to select "Yes" and press [ENTER].• The system settings screen is displayed.Making Sound Settings1. Select "Sound Settings" and press [ENTER].• The sound settings screen is displayed.2. Use [ ][ ] to select the following items for input:"Welcome Screen Vol.": Press [ENTER] and use[ ][ ] to select the volume level ("OFF", "Low","Medium" [default] or "High") played at thestart-up."Ringback Tone Vol.": Press [ENTER] and use[ ][ ] to select the volume level ("OFF", "Low","Medium" [default] or "High") of an outgoing callring."Ring Tone Vol.": Press [ENTER] and use [ ][ ] to select the volume level ("OFF", "Low","Medium" [default] or "High") of an incoming callring."Ringback Tone": Press [ENTER] and use [ ][ ] to select the calling sound pattern ("Pattern1" to "Pattern 5") (default: "Pattern 1")."Ring Tone": Press [ENTER] and use [ ][ ] toselect the incoming call sound pattern ("Pattern1" to "Pattern 5") (default: "Pattern 1")."Default Sound Lev.": Use [ ][ ] to select thevolume level (0–20) at the start of a videoconference call (default: 16)."Sound Pre-sets": Press [ENTER] and use [ ][ ] to select the tone ("More Highs",Document Version 2015-08 User Manual 109Contacts and Settings