– USB memory devices with multiple LUNs(Logical Unit Numbers)– USB memory devices formatted withmultiple partitions• USB memory devices are not guaranteed tofully operate. For details, contact your dealer.• To re-connect a USB memory device, makesure to fully remove the USB memory devicebefore connecting it again.• Confirm the USB memory device has sufficientfree space (at least 50 MB) before using it.1. Connect the USB memory device to the USB jackon the back of the unit (Page 20).Note• Make sure that the USB memory device isconnected correctly.2. Select "Export data" and press [ENTER].• The data export screen is displayed.3. Press [ENTER].• The data export begins.Note• While the data is being exported, do notremove the USB memory device. This coulddamage the unit or corrupt the data.• The data saved to the USB memory devicewill be named "hdvclogall_XXXX.tar". The"XXXX" portion of the file name variesdepending on the software version and dateof the export.• The contacts list (address.xml), profile(profile.xml), configuration data(config.xml), encryption data(sec_config.xml), and multicast tree list(alm_config_list.xml) that are included inthe file "hdvclogall_XXXX.tar" can beimported into the unit.• For information about editing the exportedcontacts list (address.xml) or profile(profile.xml), contact your dealer.4. Check the result (successful/failed) and press[ENTER].• The administrator menu screen is displayed.5. Remove the USB memory device.Note• To prevent data leakage from the USB memorydevice, make sure to erase all data from theUSB memory device before disposing of,lending, or returning it.Importing DataThe contacts list and other data exported from the unitcan be re-imported from a USB memory device.Note• Encryption data exported from the unit includeslogin IDs and passwords. Note that whenencryption data is imported, login IDs andpasswords may change and login can no longerbe performed.• A mass storage class (FAT16 or FAT32 format)compatible USB memory device can be usedwith this unit.• The following types of USB memory devicescannot be used:– U3 smart drives (USB memory devicescompatible with the U3 platform)– USB memory devices with security features– USB memory devices formatted usingNTFS– USB memory devices with multiple LUNs(Logical Unit Numbers)– USB memory devices formatted withmultiple partitions• USB memory devices are not guaranteed tofully operate. For details, contact your dealer.• To re-connect a USB memory device, makesure to fully remove the USB memory devicebefore connecting it again.• You can import a startup screen to change thedefault startup screen.132 User Manual Document Version 2015-08Contacts and Settings
