Initial SettingsNote• The Initial Settings screen is displayed whenyou turn the power on for the first time. It will notbe displayed again afterwards.• After turning the unit on, you need to set thelanguage, connection mode, device name, dateand time, and network settings. These settingscan be changed later.1. Press the Power button to turn on the unit.• The language settings screen is displayed.2. Press [ENTER] and use [ ][ ] to select thedesired language.Note• The language you can select is as follows:"English": English (default), "Deutsch":German, "Français": French, "Italiano":Italian, "Español": Spanish,"Nederlands": Dutch, "Português":Portuguese, " ": Japanese,"Русскийязык": Russian, "ㅔԧЁ᭛ ":Chinese3. Press [ENTER].4. Press [G].5. Use [ ][ ] to select "Yes" and press [ENTER].• The connection mode setting screen isdisplayed.6. Press [ENTER], use [ ][ ] to select the desiredconnection mode, and then press [ENTER] again.Note• Calls cannot be made with other partieswhose connection mode is different fromyours.• "NAT Traversal Mode" or "IP / NATTraversal Mode" can be used only afteractivating KX-VC Series NAT TraversalService with an activation key.7. Press [G].8. Select "Yes" using [ ][ ], then press [ENTER].• The device name setting screen is displayed.9. Enter a name for the device (up to 24 characters)(Page 158).10. Press [G].11. Select "Yes" using [ ][ ], then press [ENTER].• The date and time setting screen is displayed.12. Select the item using [ ][ ], then inputinformation.• Enter the year (4 digits), month (1–2 digits), day(1–2 digits), time (24 hour display), and select44 User Manual Document Version 2015-08Preparation
