"Name": Enter a device name for the local site."Connection mode": Press [ENTER] and use[ ][ ] to select a connection mode (IP Mode,NAT Traversal Mode, IP / NAT Traversal Mode)(default: "IP Mode").5. Press [G].• A dialogue box to confirm the saving of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [ENTER].• The select local site screen is displayed.Selecting a Local Site1. Press [MENU].• The Menu screen is displayed.2. Use [ ][ ] to select "Select local site" andpress [ENTER].• The select local site screen is displayed.3. Use [ ][ ] to select the local site you want to use.Note• For the currently selected local site," " is displayed in "Selected".• ""Not Registered"" is displayed for sitesthat have not been registered.4. Press [G].• A dialogue box to confirm the use of theselected local site is displayed.5. Use [ ][ ] to select "Yes" and press [ENTER].• The unit restarts automatically.Note• When changing the connection mode, the timerequired for a restart may depend on networkconditions.• Restarting the unit once more will return thelocal site to the basic settings (the first line ofthe local site selection settings). To keep theselection after restarting, set "Same settingafter restart" to "ON" (Page 131).• System settings and administrator menusettings can be performed for each local site.When settings are changed and saved while thelocal site is in the switched status, those settingswill be valid only when that local site is selected.Deleting Local Site Information1. Press [MENU].• The Menu screen is displayed.2. Use [ ][ ] to select "Select local site" andpress [ENTER].• The select local site screen is displayed.3. Use [ ][ ] to select the local site you want todelete.4. Press [R].• A dialogue box to confirm deletion is displayed.5. Use [ ][ ] to select "Yes" and press [ENTER].• The select local site screen is displayed.Document Version 2015-08 User Manual 97Contacts and Settings
