1. Select "System Info." and press [ENTER].• The unit information screen is displayed(Page 90).2. Press [BACK].• The system setting screen is displayed.Checking Enhanced FeaturesYou can check which features have been activated dueto software enhancement (Page 133).1. Select "Enhancement" and press [ENTER].• The enhanced feature confirmation screen isdisplayed.Note• For details about "Activated Features",refer to Page 133.2. Press [BACK].• The system setting screen is displayed.Performing a Network TestYou can confirm whether a network connection can beestablished with a particular IP address.Note• You cannot perform a network test from thecontact list screen or the call history screen.1. Select "Network Test" and press [ENTER].• The network test screen is displayed.2. Enter an IP address.Note• If an IPv4 address contains 1 or 2 digitnumbers, enter these numbers as they are.Do not enter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]• For the input format when an IPv6 addressis used, refer to Page 43.3. Press [R].• The network test starts. After the network test isfinished, if the network test was successful ortimed out, the details of the results aredisplayed. If the network test failed, a messageindicating the failure is displayed.4. Press [BACK].• The system setting screen is displayed.Performing Self DiagnosisYou can check how your image will be displayed andhow your voice will be heard to the other party beforestarting a video conference call, using your own displayand speakers.Note• Self diagnosis can be performed even when aheadset is connected.1. Select "Self Diag." and press [ENTER].• The self diagnosis screen is displayed with thedialogue box.Note• You can hide or display the dialogue box bypressing [B].114 User Manual Document Version 2015-08Contacts and Settings
