Connecting the UnitThis section describes how to connect the main videocamera, display, microphone, LAN cable, AC adaptorand power cord.EDCABGTo eachdeviceTo eachdeviceTo a displayTo an AC outletTo a general - purposemicrophoneFTo a routerNotice• Use only the included power cord.Note• Make sure to read the instruction manuals forall devices being connected.1. Connect the main video camera.• Connect the main video camera to the MainCamera terminal on the back of the unit usingan HDMI cable (A).2. Connect the display.• Connect the display to the HDMI 1-3 terminalson the back of the unit using an HDMI cable(B).Note• The HDMI3 terminal on the back of the unitswitches between output of your own imageand recorded images. When recording,connect the recording device to the HDMI3terminal, and set the output to that forrecording (Page 128).• If your display is not compatible with HDMI,use a component cable. Since soundsignals are not transmitted when using acomponent cable, connect an amplifier/active speaker, or use the display’sspeakers.• If "game mode" can be selected in thedisplay’s settings, set "game mode". It mayimprove voice delay.3. Connect a microphone.Digital Boundary Microphone (optional)Connect the Digital Boundary Microphone to theMIC (Digital) jack on the back of the unit using theproprietary cable (C).• Use only the included cable.• Push and turn the connector of the proprietarycable until it clicks. If the connector does notclick, try reconnecting the cable with the top andbottom of the connector reversed.Analogue Boundary Microphone (optional)Connect the Analogue Boundary Microphone to theMIC (Analog) jack on the back of the unit using theproprietary cable (D).• Use only the included cable.• Ensure that the arrow on the connector of theproprietary cable is facing up when you insertDocument Version 2015-08 User Manual 27Preparation
