Panasonic LQ-MD800 Operating Instructions Manual

Also see for LQ-MD800: Specifications Operating instructions

VIDEOVIDEOS-VIDEOS-VIDEO12YCH1(A)DV IN RS-232C USB~ AC INPAUSEREMOTECH2(B) CH1 CH2P B P RVIDEO INVIDEO OUTAUDIO IN AUDIO OUT AUDIOMONVIDEOVIDEOS-VIDEOS-VIDEO12YCH1(A)DV IN RS-232C USB~ AC INPAUSEREMOTECH2(B) CH1 CH2PB P RVIDEO INVIDEO OUTAUDIO IN AUDIO OUT AUDIOMONComponent video terminalsComponent video (BNC x 3)Stereo Audio cable (PHONO x 2)AC mains lead (supplied)VIDEOVIDEOS-VIDEOS-VIDEO12YCH1(A)DV IN RS-232C USB~ AC INPAUSEREMOTECH2(B) CH1 CH2P B P RVIDEO INVIDEO OUTAUDIO IN AUDIO OUT AUDIOMONCOMPONENTVIDEO INY P B PRTo set to progressive output mode(1) While stopped, press [MENU (SHIFT + SEARCH) ]to show the MENU window.(2) Use [ , , , ] to select the “SETUP” andpress [ENTER].(3) Use [ , ] to select the “Connection” and press[ ] or [ ].(4) Use [ , ] to select “TV System” and press[ENTER].(5) Use [ , ] to select “NTSC” and press [ENTER].(6) Use [ , ] to select “Progressive (NTSC)” andpress [ENTER].(7) Use [ , ] to select “On” and press [ENTER].To return to the previous screenPress [RETURN].S-Video, stereo audio terminalsS-Video cable (4P)Stereo Audio cable (PHONO x 2)AC mains lead (supplied)– 12 –Discs (continued)TV systemon discs.NTSCPALNTSCPALNTSCPALType of monitor televisionMulti system monitortelevisionNTSC monitor televisionPAL monitor televisionYes/NoYesYesYesNoYes* 1 (PAL60)Yes* 2Put the unit on a stable, horizontal surface where it will not be exposed to excessive dust. Do not block its vents or place where it canbecome hot.First of all, please disconnect AC mains leads of all units, which you are going to connect with before connecting and disconnecting cables.Reconnect the AC mains leads when all connections are complete. Read the instructions for the other units carefully.Audio/video input will not be output if this unit is switched off or malfunctions. Consider other connections in the system when outputtingaudio/video for the purpose of monitoring input. To record essential material, use multiple units to record at the same time, or make othersimilar allowances in your system setup.Connecting and Setting upYou may be unable to use same functions or they mayfunction incorrectly if the TV system for the unit isdifferent to that for the disc.* 1 If your monitor television is not equipped to handle PAL 525/60signals the picture will not be shown correctly.* 2 If you set the TV system of this unit to “PAL”, the picture may beclearer.Types of disc for the type of connectedmonitor televisionComposite video, monaural audio terminalsVideo cable (BNC)Audio cable (PHONO)AC mains lead (supplied)Connecting a Monitor televisionVIDEOOUTVIDEOINAUDIOINAUDIOINAUDIOINAUDIOOUTAUDIOMONOOUTS-VIDEOOUTS-VIDEOINAUDIOOUTWhen you use the discs recorded either PAL or NTSC, refer to thistable. If you select the same TV system (PAL or NTSC) setting forthis unit and your monitor television as the disc you want to play,the picture can be clearer.