(2) Use [ , ] to select the menu and press [ ].(3) Use [ , ] to select the item and press [ ].(4) Use [ , ] to select the setting.• Some options require different operations. Follow the on-screen instructions and the instructions described later.To return to the previous screenPress [RETURN].When you are finishedPress [FUNCTION (SHIFT + STATUS)].For your reference:• The screens depend on the disc contents and the FUNCTIONmenu is not displayed when a disc is not inserted in the unit.• Depending on the condition of the unit (playing, stopped, etc.)and the type of software you are playing, there are some itemsthat you cannot select or change.– 20 –Using the FUNCTION menusFUNCTION menus contain information about the disc or unit. Thesemenus allow you to perform operations by changing thisinformation.SoundtrackSoundtrack languageChange the number to select a soundtrack.Audio attributeLPCM/PPCM/ Digital : Signal typek (kHz) : Sampling frequencyb (bit) : Number of bitsch (channel) : Number of channelsSubtitleSubtitle languageChange the number to select a subtitle language.Subtitles on/offTurn the subtitles ON or OFF.Audio channelChange the output audio channel.While playing a DVD-RAM.The selected setting is reflected in the status display.e.g., : “CH1 CH2” is selectedAngleChange the number to select an angle.For your reference:• You cannot change the audio, subtitles, or angles on DVD-Videocreated on this unit.DVDCH1 CH2 CH1 CH2RAMDVDDVDMenu Item Setting(1) During play, press [FUNCTION (SHIFT +STATUS)].Common proceduresDisc menu(No display)