Panasonic LQ-MD800 Operating Instructions Manual

Also see for LQ-MD800: Specifications Operating instructions

Repeat PlayYou can play a program, play list, chapter, title, group or trackrepeatedly.During play, use [ , ]The display changes as illustrated.While playing a play list, use [ , ]Notes• Repeat play may not work as desired with some discs.• Repeat play does not work if the disc’s elapsed play time is notshown on the unit’s display.• To change from instant repeat play to repeat play, stop instantrepeat play before using repeat play.• You cannot use repeat play in a row for two or more play lists.MarkerYou can mark points on a disc to return to later (see page 18).RAMPL (PLAY LIST) OFFRAMChapter Title OFFDVDPRG (PROGRAM) All OFFDVD-RRAM– 21 –Using the FUNCTION menus (continued)MODENormal: Default settingSoft: Soft picture with fewer video artifactFine: Details are Fine modeCinema: Enhances detail in dark scenes.User: You can make further adjustments next parameter.Page 1/2 of “Detail picture adjustment ”“User ” → [ ] → [ ] → [ENTER]Contrast: Increases the contrast between light and dark parts ofthe picture (-7 to +7).Brightness: Brightens the picture (0 to +15).Sharpness: Adjust the sharpness of the edges of the horizontalline (-6 to +6).Color: Adjust the shade of the picture’s color (-7 to +7).Page 2/2 of “Detail picture adjustment ”“User ” → [ ] → [ ] → [ENTER] → [ ]Gamma: Increases the brightness of the center ranges toimprove detail and contrast in dark scenes (0 to +5).3D NR: Reduces overall noise (0 to +4).Block NR: Smoother block noise (0 to +3).Mosquito NR: Reduces the smudging that appears aroundcontrasting sections of the picture (0 to +3).• Press [ENTER] or [RETURN] to enter the setting.• To initialize “Detail picture adjustment”, open the “Detail pictureadjustment” screen and press [SHIFT + RETURN].DNRWhen any item other than “User” is select, you can turn therecommended setting for 3D NR, block NR, and mosquito NRon and off.ProgressiveThis menu is displayed only when setting both• Progressive (NTSC)” to “ON” and “TV System” to “NTSC” in“Connection” Menu.ON: Enables progressive outputOFF: Disables progressive outputTransfer (When progressive output is ON)Select the method of conversion for progressive output to suitthe type of material being played.Auto1: For film materialAuto2: For video material (the same as Auto1, but able toconvert 30 frames per second progressive video)Video: For video materialON OFFSound menuMonitorThis is used to select the audio signal to the AUDIO MONconnectorMIX CH1 CH2Play menu Picture menu