Panasonic LQ-MD800 Operating Instructions Manual

Also see for LQ-MD800: Specifications Operating instructions

RAMErasing parts of a program (Partial Erase)You can divide a selected program into two.RAMDividing programs (Divide)– 27 –Using the SEARCH PROGRAM (continued)To stop partway throughSelect “Cancel” in step (8) and press [ENTER] or [RETURN].To erase another part of the same programSelect “Next” in step (7) and perform step (8), then repeat steps(5)–(8).For your reference:• Use search and slow-motion to find the points.• You cannot specify an end point before a start point or a startpoint after an end point.• You may not be able to specify start and end points within 3seconds of each other.• You cannot specify start and end points if the picture recorded is stilled.(6) Use search functions such as fast-forward andslow-motion to find the end point of the part youwant to erase and press [ENTER].(6) Use [ , ] to select “Exit” and press [ENTER].(7) Use [ ] to select “Divide” and press [ENTER].• The program is divided at the point.(7) Use [ , ] to select “Exit” and press [ENTER].(8) Use [ ] to select “Erase” and press [ENTER].• Play lists created with the erased part are also erased. To stop partway throughSelect “Cancel” in step (7) and press [ENTER] or [RETURN].To change the point to divideSelect “Divide” in step (6), then repeat steps (5)–(7).To check the division pointBy selecting “Preview” in step (6) and pressing [ENTER], playwill begin from a point 10 seconds prior to the division point. Youmay wish to make sure that the division point is at anappropriate location.Notes:• The divided programs retain the title of the original program.• A minute portion of the recording directly preceding the divisionpoint may be lost.For your reference:• Use search and slow-motion to find the points.• It is not possible to carry out “Divide” in the following cases:• When the resulting part(s) are extremely short.• When the total number of programs is more than 99.• You cannot use the [STOP ] button while finding the divisionpoint.• The unit pauses play when the end of the program is reachedduring this procedure.• The disc’s available recording time may not increase aftererasing short parts of programs.• You cannot use the [STOP ] button while finding start and endpoints.The specified parts of the program are erased completelywhen you use this procedure and cannot be retrieved.Check the program carefully to ensure it isn’t one youwant to keep.You must be sure you wish to divide a program becauseonce a program has been divided it cannot be returned toits original form.After performing steps (1) to (3) of “Erasingprograms”, perform the following steps:(4) Use [ , ] to select “Partial Erase” and press[ENTER].(5) Use search functions such as fast-forward andslow-motion to find the start point of the part youwant to erase and press [ENTER].After performing steps (1) to (3) of “Erasingprograms”, perform the following steps:(4) Use [ , ] to select “Divide” and press[ENTER].(5) Use search functions such as fast-forward andslow-motion to find the point you want to divideand press [ENTER].