Panasonic LQ-MD800 Operating Instructions Manual

Also see for LQ-MD800: Specifications Operating instructions

(1) During play, press [STOP ].• The unit remembers the position.(2) Press [PLAY ].• Play starts from where you stopped it.• The STOP button lights and the PLAY button flashes whenthe resume function is operating.To cancel the resume functionPress [STOP ] while the unit remembers the position. (Theposition is also cleared when you turn the unit off.)• The STOP button lights and the PLAY button goes out whenthe resume function is not operating.Starting play from where you stopped it(Resume Function)While stopped, press and hold[REV ] or [FWD ].• The disc is skipped to the beginning orend and play is paused.During play, press [REV ]or [FWD ].• There are 5 search speeds. Each press increases the searchspeed.• The speed shown is approximate.• Press [PLAY ] to return to normal play.• You will hear sound during fast forward play at the first searchspeed of the five ones.• After the title number changes, the unit returns to normal play.DVDFast forward and rewindWhile paused, press [REV ] or [FWD ].• There are 5 slow-motion speeds. Each press increases theslow-motion speed.• Press [PLAY ] to return to normal play.• The speed shown is approximate.• After the title number changes, the unit returns to normal play.• Play may not operate smoothly at some slow-motion speeds.DVDSlow-motion playWhile paused, press [ ] or [ ].[ ] : backward[ ] : forward• Each press shows the next or previous frame.• Press [PLAY ] to return to normal.Frame-by-frame viewingYou can skip to the beginning of tracks and chapters or markersand restart play from there.During play or while paused, press [SHIFT+“ ”]or [SHIFT+“ ”].[ ] : backward[ ] : forward• Each press increases the number of skips.Skipping– 17 –Playing discs(1) Press [OPEN/CLOSE ] to open the tray andinsert a disc.• Insert label-up with the arrow facing in. (With double-sideddiscs, load so the label for the side you want to play isfacing up.)• Insert inside the tray’s guides.• insert one disc only.(2) Press [OPEN/CLOSE ] to close the tray.• The unit takes several seconds to read the disc.(3) Press [PLAY ] to start play.• Playback starts from the most recently recorded program.• Playback starts from the beginning of the disc.To pause playPress [PAUSE ].Press again to restart playing.To stop playPress [STOP ].(Starting play from where you stopped it)• A screen similar to the illustrated mayappear when you stop play.DVDDVD-RRAMDVDPlay position/Pause positionOnceTwiceChapter/trackDVD-RRAMPlay position/Stop positionMarkerOnceTwiceThree timesThe program beforeCurrent programThe program afterNote:• When you are at stop position, you cannot move to the Markereven if you press [ ] or [ ].For your reference:• After skipping, the unit returns to the previous state, play orpause.• Press [PLAY ] to restart play if it was paused.• During play, only pressing [ ] or [ ] allows skip.DVD-RRAM