- 49 -Vacuum Cleaner 1. Unplugged at wall outlet. 1. Plug in firmly, push on/offwon’t run. switch to on.2. Tripped circuit breaker/blown 2. Reset circuit breaker orfuse. replace fuse at householdservice panel.3. On /off switch not turned on. 3. Push on/off switch to on.Poor job of dirt 1. Full or clogged dust bag. 1. Change bag.pick-up. 2. Worn agitator. 2. Replace agitator.3. Clogged nozzle or bag holder. 3. Check CLOG REMOVAL.4. Clogged hose. 4. Check for clogs.5. Hole in hose. 5. Replace hose.6. Broken/misplaced belt. 6. Replace/fix belt.7. Hose not inserted fully. 7. Insert hose fully.8. Motor protection system 8. Check for clogs.activated.9. Dirty filters. 9. Change filters.Light won’t work. 1. Burned out light bulb. 1. Change light bulb.Agitator not turning 1. Broken belt. 1. Replace belt.2. Belt installed incorrectly. 2. Check BELT CHANGINGAND AGITATOR CLEANING.Air flow restricted 1. Attachment use restricts 1. Check ATTACHMENTS.with attachment use. air flow.Sound changes. 2. New carpet fuzz clogged 2. Check CLOG REMOVAL andair path. clean hose.PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONBEFORE REQUESTING SERVICEReview this chart to find do-it-yourself solutions for minor performance problems.Any service needed, other than those described in these Operating Instructions,should be performed by an authorized service representative.WARNING Electrical Shock or Personal Injury HazardDisconnect the electrical supply before servicing or cleaning the vacuum cleaner.Failure to do so could result in electrical shock or personal injury from vacuumcleaner suddenly starting.