Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual

Also see for AVCCAM AG-AF100P: Operating instructions Operating instructions

Contents

Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual Manual pdf 11 page image

11 ShootingOptical Image StabilizerUse the Optical Image Stabilizer (OIS) to reducethe effects of camera shake when shooting byhand.Press the OIS button to turn the function on andoff. appears on the viewfinder and the LCDmonitor when this function is on. Turn the functionoff when using a tripod for more natural images.POWERFOCUS ..BARSEVF DTL CH1 SELINT(L)ONOFF ONOFFINPUT1AUDIOMIC POWER +48VINPUT1 INPUT2INPUT2INPUT1INPUT2CH2 SELWFMCOUNTER-RESET/TC SETZEBRA OISFor lenses that have an OIS button, only the lens•button is active and the button on the camera isdeactivated. Also, some lenses do not have anOIS function.This function will not be as effective when the•vibration is severe or when tracking a movingsubject.Adding effects to imagesPress the USER button you have allocated to theBLACKFADE or WHITEFADE feature to add fadingeffects to your images. The button’s function isforcibly canceled during playback or REC CHECKand also when thumbnails are displayed.BLACKFADE:Press the button to fade out to black. Audio alsofades out. Fade-in starts after fade-out, whenthe button is released.WHITEFADE:Press the button to fade out to white. Audio alsofades out. Fade-in starts after fade-out, whenthe button is released.Using the USER buttonsYou can allocate one of thirteen features to each ofthe three USER buttons.Use these buttons to change shooting settingsquickly or add effects to the images you areshooting.The following features are allocated to the buttonsat the time of shipping.USER1: FAUSER2: ATW LOCKUSER3: REC CHECKFor details, see the setup menus, SW MODEscreen, USER1 SW to USER3 SW. (Page 55)If you press a USER button to which one of thefunctions has been assigned, and then turn OFFthe power or change the mode during operation ofthe USER button function, the effect added to theimage will not be retained.Backlight compensationPress the USER button you have allocated to theBACKLIGHT feature when shooting subjects litfrom the back.BACK appears on the screen.Backlight compensation adjusts the iris so thesubject doesn’t come out dark.Press the same USER button to turn the featureoff. (In the manual iris mode, the iris status isretained at the corresponding point even whenbacklight compensation is canceled.)The backlight compensation function does not•operate with lenses in which AUTO IRIS is notfunctioning.Color barsPress the BARS button in the CAM mode to outputa color bar screen to a television or monitor so youcan adjust them. Press the button again to turn thefeature off.While the color bar is displayed, a test tone of•1 kHz will be output from the headphone terminalor the AUDIO OUT terminal. There will be nospeaker output.The color bar can be recorded by pressing the•START/STOP button.The color bar display is canceled when the power•is turned off.