Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual

Also see for AVCCAM AG-AF100P: Operating instructions Operating instructions

Contents

Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual Manual pdf 44 page image

44Nonlinear editingNon-linear editing of video data on SD MemoryCards can be performed by connecting the cameravia the USB connection cable to a computer forediting. (As for connection, refer to page 42)Use a sufficiently charged battery or the ACadaptor.The following conditions are necessary for USBconnection.PC with Windows XP, Windows Vista, or•Windows 7; or Macintosh with Intel CPU (IntelMac)USB 2.0 (High Speed, Mass Storage Class)•compatibility (not compatible with USB 1.1)Only connect to one computer at a time.•Camera cannot be operated if a hub or other•device is connected between the camera andcomputer.1 Insert the SD Memory Card, and move thePOWER switch to ON.2 Connect the camera to the computer withthe USB connection cable.Turn the computer’s power on beforeconnecting.3 Select ‘PC’Dubbing can be performed to a Blu-ray DiscRecorder, etc. by selecting ‘RECORDER’.4 Perform non-linear editing on the computer.The contents of the SD Memory Card willappear as a removable disk icon within MyComputer or the desktop on the computerscreen. (Page 73)(Example) WindowsRemovable disk (E:)(Example) MacintoshNO NAMEWhen copying files from the camera to a•computer, be careful to ensure that files arenot accidentally overwritten.For more details, please refer to your•computer editing software’s operatinginstructions.When changing cards, always ensure that•the access lamp is not flashing and that thecard is not currently being accessed.Camera functions cannot be used when the•camera is connected to a computer.Always perform “safe hardware removal”•when disconnecting the cable.The data on the SD Memory Card cannot be•accessed when the SD Memory Card slotcover is open.5 Turn the camera’s power off.If the camera cannot be correctly recognized•by the computer, this may be able to beremedied by one of the following methods.Turn the power of the camera and theācomputer off and back on again.Remove the SD Memory Card from theācamera and reinsert it.Connect to a different USB terminal on theācomputer.If you are using an SDXC memory card,•some personal computers may not recognizethe data. Make sure your personal computersupports SDXC cards.