Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual

Also see for AVCCAM AG-AF100P: Operating instructions Operating instructions

Contents

Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual Manual pdf 21 page image

21 ShootingSaving scene files and other settings on SD Memory Cards4 Push the Operation lever again, select YESwhen the following screen is displayed, andpush the Operation lever.In the following example, SCENE-01 is the•TITLE name. To change the TITLE name,see the description below.5 Press the MENU button to exit the menumode.To read files1) Select READ in step 2 and push the Operationlever.2) Select the file number and push the Operationlever.3) Select YES on the confirmation screen.READ COMPLETED will be displayed whenreading is complete.To add titles to files1) Go through steps 1 - 3.2) Tilt the Operation lever in the directions toselect characters, and tilt in the direction tomove to the next character.The following characters may be inputted.(Space), A-Z, 0-9, : ; < = > ? @ [ ] ^ _ - . /3) Push the Operation lever when all charactershave been inputted.4) Select YES on the confirmation screen.If WRITE PROTECT appears, release the•protected status of the SD Memory Card.If WRITE NG CANNOT ACCESS appears, quit•all other operations (such as playback) beforeproceeding.You can save up to four scene file settings or othersettings as files on an SD Memory Card, and youcan also load them from the card.In the case of the scene files, the current settings•are automatically saved in the unit, and thesaved data is written on an SD Memory Card.When data has been read from an SD MemoryCard, the current settings are rewritten at thesame time as the data saved inside the unit.The data in all the scene files, F1 to F6, is•rewritten.If you have saved a scene file1 Set the unit’s POWER switch to ON.2 Select the slot number for the SD memorycard onto which you wish to save fromthe CARD WRITE option on the settingsmenu SCENE FILE screen, and press theOPERATION lever.For all other settings, select USER FILE.For menu operations (Page 44 of Vol.1)•Operations may also be performed using buttons•on the remote control that correspond to thoseon the camera. For details, see “Description ofparts (Remote control)”. (Page 23 of Vol.1)3 Tilt the Operation lever in thedirections, select the file number (1 - 4), andpush the Operation lever.