Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual

Also see for AVCCAM AG-AF100P: Operating instructions Operating instructions

Contents

Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual Manual pdf 18 page image

18Adjusting the recording levelAUDIO control knobsUse the AUDIO control knobs to adjust therecording level of the built-in microphone or ofaudio signals input through the INPUT 1/2 (XLR3-pin) terminals.To adjust the volume of the sound for monitoring.(Page 12)To adjust the recording level of the audio signals,turn the AUDIO control knobs while referring tothe audio level meter at the bottom left of theviewfinder and LCD monitor, regardless of the MICALC option setting (Page 56) on the RECORDINGSETUP screen of the setting menu.Check the recording volume level prior to•shooting.The recording level of this camera is set•approximately 8 dB higher than Panasonicbroadcasting camera recorders (AJ seriesproducts).Switching Audio Input (continued)4 Use the CH1 SELECT switch to select theinput signal to be recorded to audio channel 1.INT (L):Audio from the built-in microphone Lch isrecorded to audio channel 1.INPUT 1:Audio from a device connected to INPUT 1terminal is recorded to channel 1.INPUT 2:Audio from a device connected to INPUT 2terminal is recorded to channel 1.5 Use the CH2 SELECT switch to select theinput signal to be recorded to audio channel 2.INT (R):Audio from the built-in microphone Rch isrecorded to audio channel 2.INPUT 2:Audio from a device connected to INPUT 2terminal is recorded to channel 2.When inputting the microphone signal to•channels 1 and 2, connect the microphone toINPUT 2 and switch both CH1 SELECT andCH2 SELECT to INPUT 2.