Panasonic NV-MX2 Operating Instructions Manual

Contents

Panasonic NV-MX2 Operating Instructions Manual Manual pdf 13 page image

13CAMERAVCRCARD.P.BPUSHMODEONOFF2 2,3,4,5CAMERA FUNCTIONSPRESS MENU TO EXIT1.CAMERA SETUP2.DIGITAL EFFECT3. CARD SETUP5. RECORDING SETUP6. DISPLAY SETUP7. OTHER FUNCTIONS8. DEMO MODEPRESS MENU TO EXIT2.DIGITAL EFFECT3.CARD SETUP5.RECORDING SETUP6.AV IN/OUT SETUP7.DISPLAY SETUP8.OTHER FUNCTIONS1.PLAYBACK FUNCTIONSCARD FUNCTIONSPRESS MENU TO EXIT1. ERASE CARD FILE2. CARD EDITING3. DISPLAY SETUP4.OTHER FUNCTIONSVCR FUNCTIONS34MENU11W.B/SHUTTER/IRIS/VOL/JOG4.MULTI-PICTURES4.MULTI-PICTURESPICTURENo.25 IMGA0012.JPG1, 25PUSHW.B/SHUTTER/IRIS/VOL/JOGUsing the Menu ScreenTo facilitate the selection of a desired function or setup, this Movie Cameradisplays various function settings on Menus.1 Press the [MENU] Button.≥The Menu corresponding to the Mode selected by using the[OFF/ON/MODE] Switch 1 is displayed.≥When the [CAMERA] Lamp is on, the Camera Function Menu isdisplayed. 2≥When the [VCR] Lamp is on, the VCR Function Menu is displayed. 3≥When the [CARD P.B.] Lamp is on, the Card Function Menu isdisplayed. 4(NV-MX8 only)2 Turn the [PUSH] Dial to select a desired Sub-Menu.≥Turn the [PUSH] Dial to display the highlightened item.3 Press the [PUSH] Dial to display the selected Sub-Menu.4 Turn the [PUSH] Dial to select the item to be set.5 Press the [PUSH] Dial to set the selected item to a desiredMode.≥With each press of the [PUSH] Dial, the cursor [1] moves to thesubsequent Mode. Menu items that cannot be used in combination withthe selected item are displayed in dark blue.≥While a Menu is displayed, you cannot record or play back. Menus can bedisplayed during playback but not during recording. The above operationscan be done using the [MENU] Button, [SET] Button and [ITEM] Button onthe Remote Controller.(l8)To Exit the Menu ScreenPress the [MENU] Button again.About the Menu Mode SettingThe setting selected on the Menu will be retained even when the MovieCamera is turned off. However, if the Battery or AC Adaptor is disconnectedbefore turning off the Movie Camera, the selected setup may not be retained.(But, the setups of [EFFECT2](l25) are not retained.)≥Menu operation flow is shown in this text by >>.ªFile Selection in the Card Playback Mode(NV-MX8 only)A File Selection Operation may be necessary during Menu Operations. In thiscase, carry out the following procedure.1111Turn the [PUSH] Dial and select a file.≥The selected file is marked by a frame 5.2222Press the [PUSH] Dial to confirm the selection of the file.≥After the above File Selectioin Procedure, carry out the various MenuOperations. (The above procedure will not be repeated in the followinginstructions.)