Panasonic NV-MX2 Operating Instructions Manual

Contents

Panasonic NV-MX2 Operating Instructions Manual Manual pdf 34 page image

34[S-VIDEO IN]123S-VIDEOIN/OUTDIGITAL(to USB)/EDITE(MINI)AUTO MNL PUSHMENU2W.B/SHUTTER/IRIS/VOL/JOGDIGITAL(to USB)/EDITE(MINI)121AV IN/OUTPHONESS-VIDEOIN/OUTD.STILLPICTUREMICDIGITAL(to USB)/EDITE(MINI)DVUsing the Automatic Printing Function(Autoprint)By connecting a Video Printer 1 equipped with a 5-pin Edit Socket and yourMovie Camera, you can automatically print out the still pictures with thePhotoshot Index.(l29)After making connections in the figure, set up the Video Printer asnecessary.1 Search for the Still Picture where you want to start printingwith the Automatic Printing Function.≥If you want to print all the still pictures recorded on the Cassette, rewindthe tape back to the beginning.2 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>[AUTO PRINT] >> [YES].Or set [CARD FUNCTIONS] >> [CARD EDITING] >>[AUTO PRINT] >> [YES]. (NV-MX8 only)≥Automatic printing starts.≥Autoprint Function cannot provide Mega-pixel image.To Cancel AutoprintPush the Operation Lever towards [∫].2 Edit Cable VW-K8E (optional)3 S-Video Cable (not supplied)≥For other notes concerning this item, see page 50.~~~~~~~~~~~~~~~~~~~~~~~~Personal Computer Connection KitUsing the Personal Computer Connection Kit, you can import still picturesinto your personal computer. (This kit is supplied only to NV-MX2.)≥Use the Digital Still Picture Terminal [D.STILL PICTURE] 1 when usingthe Personal Computer Connection Kit.≥When recording, be careful not to cut off the Time Code from the start of thetape.≥Importing the Moving Pictures or Voice Data is not possible.≥For more details on the operating environment, connections, andprocedures, please refer to Personal Computer Connection Kit’s operatinginstructions.~~~~~~~~~~~~~~~~~~~~~~~~Using the USB Connection KitUsing the USB Connection Kit, you can import still pictures into your personalcomputer. (This kit is supplied only to NV-MX8.)1 Install the supplied USB driver.2 Set the Movie Camera to Card Playback Mode.3 Set the Movie Camera to Still Playback Mode.4 Connect the supplied USB Cable 1to [DIGITAL (to USB)]Socket.2≥It enters PC connection mode.≥The USB Connection Kit can be used with Windows98 Second Edition/Me/2000.≥Use the AC Adaptor as power source for the Movie Camera. (The Card orits contents may be destroyed if battery power is lost while transmittingdata.)≥Mode cannot be changed in PC connection mode by sliding [OFF/ON/MODE] Switch.≥For more details on the operating environment, installation, connections,and procedures, please refer to USB Connection Kit’s operatinginstructions.