Panasonic NV-MX2 Operating Instructions Manual

Contents

Panasonic NV-MX2 Operating Instructions Manual Manual pdf 31 page image

31MULTI/P-IN-P1232ZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM4MENU41,2,3 1,2PUSHW.B/SHUTTER/IRIS/VOL/JOG 15ªPlaying back with Multi-Picture ModeStrobe Multi-Picture Mode [STROBE] 1:You can capture 9 consecutive still pictures from playback video.Manual Multi-Picture Mode [MANUAL] 2:Selecting a desired still picture one at a time, you can capture 9 still pictures.Index Multi-Picture Mode ([PHOTO], [SCENE]) 3:You can capture 9 screens of pictures to which index signals have beenattached.1 Set [DIGITAL EFFECT] >> [EFFECT 1] >> [MULTI].2 Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE],[MANUAL], [PHOTO] or [SCENE], whichever mode youprefer.When [STROBE] is selected:≥Set the [SPEED] to a desired strobe speed. At the [FAST] setting, 9consecutive still pictures is captured within approximately 1 second, at[NORMAL] within approximately 2 seconds, and at [SLOW] withinapproximately 3 seconds.≥If you set [SWING] on the [MULTI-PICTURES] Sub-Menu to [ON], theintervals at which the 9 still pictures are taken are longer at thebeginning and end than in the middle of the swing strobe period, and itis useful for analyzing swing motion,etc.,in sports.3 Exit the Menu by pressing the [MENU] Button.4 Play back the tape.5 Press the [MULTI] Button.≥If [STROBE] is selected: 9 screens are automatically captured startingat the point which the Button is pressed.≥If [MANUAL] is selected: Press the [MULTI] Button at each scene youwant to capture. When 9 screens are captured, the tape will stop.≥If [PHOTO] or [SCENE] is selected: From the point at which theButton is pressed, 9 screens of pictures to which index signals areattached are captured in the playback direction. After 9 screens arecaptured, the tape will stop, but if there are 8 or less pictures to becaptured, the tape will stop at its end.Deleting all the captured Multi picturesWhile displaying the multi-pictures that have been captured, press the[MULTI] Button.≥If [MANUAL] has been selected, press the [MULTI] Button after 9 picturesare displayed.To display the Multi-Pictures againPress the [MULTI] Button for 1 second or longer.To Delete Multi pictures one by one(When Pictures have been captured in Manual Mode)When the [MULTI] Button is pressed for 1 second or longer while the stillpictures are displayed, the pictures captured last is deleted. If you continueto press the Button, the pictures are deleted consecutively.≥After still pictures are deleted one by one, they cannot be displayed again.To Cancel Capturing Pictures (When Pictures have beencaptured in Index Mode)Press the [∫] Button.To Search the tape position of a desired picture among theplayback pictures displayed on 9 screens1111After displaying pictures in Multi-Picture Mode, turn the[PUSH] Dial to select the image whose tape position youwant to search.≥The selected picture is marked with a frame.2222Press the [:] or [9] Button 4on the RemoteController.≥A still picture playback takes place at the selected picture.≥For other notes concerning this item, see page 49.