Panasonic NV-RX3A Operating Instructions Manual

Also see for NV-RX3A: Operating instructions Operating instructions

Notes:1. The Car Battery Cord can only be used with12 V DC negative-grounded vehicles.2. Do not start the car engine while the MovieCamera is being powered by the car battery.3. If the voltage drops suddenly e.g. because thecar air-conditioner is turned on, the MovieCamera is automatically turned off to protect it.Wait about 10 seconds before turning it onagain.4. Some cars, RVs and campervans use 24 V.Please confirm with vendor that your vehicleuses 12 V before using the Car Battery Cord. Ifused on 24 V, damage may occur and is notcovered by the warranty.1 Start the engine and then plug the CarBattery Cord Into the Cigarette LighterSocket.2 Connect the other end of the cord to the[DC IN] Socket on the Movie Camera.Editing a Previously Recorded TapeConnect the Movie Camera to the VCR using theSupplied Audio/Video Cable.■ OperationsPlayback Unit (Movie Camera): OQ00Recording Unit (VCR): @(D®O Insert the recorded video cassette for playbackinto the Movie Camera.0 Play back the tape and locate the end of thescene that you want to dub, and note the tapecounter position.0 Rewind the tape and locate the beginning of thescene that you want to dub.@ Insert the video cassette for recording into theVCR and put it in the Recording Pause Mode.Also read the Operating Instructions of the VCR.The picture quality deteriorates slightly in thedubbing process, however, this can beminimized by selecting the standard recordingspeed (SP Mode) on the VCR.0 Start the playback.© Press the Pause/Still Button to start recording.(7) As soon as the Tape Counter Indication on theMovie Camera reaches the position noted instep 0:Press the Pause/Still Button to put the VCR inthe recording pause mode, thus finishing thedubbing.Q For all additional scenes that you want to dub,follow the above steps 0 to (7).52