■ [EDIT] SocketBy connecting a Panasonic Editing Controller(optional) to this socket as well as to a PanasonicVCR equipped with Edit Socket, highly precise andspeedy editing becomes possible.The following types of Editing Controller can beused with this Movie Camera.1) Connecting the Movie Camera to a PanasonicVCR equipped with synchro-edit socket(3.5 mm stereo jack) as the recording unit,using the 5-pin Synchro Cord VW-K10E(optional).•This is a single event edit controlling system.Therefore, the user needs to know the startand end points of the scene to be edited andneeds to start and stop the editing manually.2) Connecting the Movie Camera to a PanasonicVCR equipped with 5-pin edit socket as therecording unit, using the Editing ControllerVW-EC310E (optional).•This Editing Controller can be programmed forautomatic editing of up to 8 scenes.•When using this Editing Controller, be Sure toedit with the “Standard-Speed Mode”.3) Connecting the Movie Camera to any brand ofVCR equipped with Infra-Red RemoteController as the recording unit, using theEditing Controller VW-EC1E (optional).•This Editing Controller can be programmed forautomatic editing of up to 4 scenes.Note:The full instructions as written in the OperatingInstructions of the Editing Controllers and the 5-pinSynchro Cord must be followed or the edit functionmay not operate correctly.This may not be a fault of the Movie Camera.53 Options/Editing