Panasonic NV-RX3A Operating Instructions Manual

Also see for NV-RX3A: Operating instructions Operating instructions

vvnen you warn 10 laKe part in urt; auuon uioi yuuare recording, simply place the Movie Camera ona tripod and then start and pause recording as wellas operate the zoom and other functions bypressing a button on the Remote Controller. Aim itat the Remote Control Receiver Window on thefront of the Movie Camera and press thecorresponding Button.For details about the functions of the buttons onthe Remote Controller, refer to the correspondingpages {listed on the left page). However, excepton this page, the use of the Remote Controller isnot explained in this manual.Notes:• Do not cover the Transmitter Window on theRemote Controller with your hand, etc.•The Remote Controller may not operate correctlyif it is used in direct sunlight, near fluorescentlamps or too close to the Movie Camera.•When using the Remote Controller outdoors,operating range may become shorter than5 metres.•The zooming speed can not be changed.•To prevent inadvertent operation of otherinfra-red remote-controlled units, this MovieCamera needs to receive each infra-redcommand 3 times.For this reason, there is a slight delay betweenpressing the [W] or [T] Button on the RemoteController and the actual operation of themechanical zoom function on the Movie Camera.■ Using the Remote Controller Holder(To keep the Remote Controller handy when yougo out recording)1 Remove one end of the Shoulder Strapfrom the Movie Camera.2 Remove the Shoulder Strap Adjuster.3 Pull the Shoulder Strap In the direction ofthe arrow through the two slits on the backof the Remote Controller Holder.4 Re-attach the Shoulder Strap Adjuster.5 Re-attach the Shoulder Strap to the MovieCamera.(See “Attaching the Shoulder Strap” on p. 56.)6 Insert the Remote Controller securely intothe Holder.9 Basic Operations