Chapter 4 Settings — [PROJECTOR SETUP] menu118 - ENGLISH3) Press asqw to select an input.f The items will switch each time you press the button.[LAST USED] Keeps the input selected last.[VIDEO] Sets the input to VIDEO.[RGB1] Sets the input to RGB1.[RGB2] Sets the input to RGB2.[DVI-D] Sets the input to DVI-D.[HDMI] Sets the input to HDMI.[DIGITAL LINK] Sets the input to DIGITAL LINK.[SDI]*1 Sets the input to SDI.[INPUT1] - [INPUT10] *2 Sets the input to DIGITAL LINK, and switch the input of Panasonic twisted-pair-cable transmitter tothe specified input.*1 Only for PT-DZ870E*2 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to theprojector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, itis disabled.4) Press the button.[RS-232C]Set the communication conditions of the / terminal.Setting the communication condition of the terminal1) Press as to select [RS-232C].2) Press the button.f The [RS-232C] screen is displayed.3) Press as to select [INPUT SELECT].4) Press qw to switch the item.[PROJECTOR] Use the terminal of the projector to execute RS-232C communication.[DIGITAL INTERFACE BOX] Executes RS-232C communication via the optional Digital Interface Box (Model No.: ET-YFB100G)and the terminal.5) Press as to select [(IN) BAUDRATE].6) Press qw to switch the item.f The items will switch each time you press the button.[9600]Select the proper speed.[19200][38400]7) Press as to select [(IN) PARITY].8) Press qw to switch the item.f The items will switch each time you press the button.[NONE]Select the parity condition.[EVEN][ODD]Setting the communication condition of the terminal1) Press as to select [RS-232C].2) Press the button.f The [RS-232C] screen is displayed.3) Press as to select [(OUT) BAUDRATE].
