Chapter 4 Settings — [3D SETTINGS] menu94 - ENGLISHf Displays the 3D test pattern in 60 Hz vertical scanning frequency when no signal is input. When a signal is input, the 3D test pattern isdisplayed in the vertical scanning frequency that is same as the input signal.[SAFETY PRECAUTIONS MESSAGE]Set to show or hide the safety precautions message related to 3D viewing when the projector is switched on.1) Press as to select [SAFETY PRECAUTIONS MESSAGE].2) Press qw to switch the item.f The items will switch each time you press the button.[ON] Shows the safety precautions message related to 3D viewing when the projector is switched on.[OFF] Hides the safety precautions message related to 3D viewing when the projector is switched on.Notef Set to [OFF] to hide the safety precautions message related to 3D viewing when the projector is switched on.f A confirmation screen is displayed when switched from [ON] to [OFF]. Press qw to select [OK], and press the button to changethe setting to [OFF].Attentionf When 3D images are viewed by unspecified number of people for commercial use, display the safety precautions message related to 3Dviewing to notify viewers.[3D SAFETY PRECAUTIONS]Show the safety precautions message related to 3D viewing.1) Press as to select [3D SAFETY PRECAUTIONS].2) Press the button.f The [3D SAFETY PRECAUTIONS] screen is displayed.f Press qw to switch the page.1/2 2/23D SAFETY PRECAUTIONSIf you view 3D images, please note below.In addition, when 3D images will be viewedby unspecified number of peopleor used for commercial applications,someone in authority should conveythe following precautions.To enjoy 3D images safely and comfortably,please refer to the Operating Instructionsfor in-depth description.CHANGEEXIT3D SAFETY PRECAUTIONSPlease refrain from viewing 3D imagesif you do not feel well or are experiencingvisual fatigue.Please use the contents which has beenproperly made for 3D.View from at least the recommended distance.(3 times the effective height of the screen)Refer to the Operating Instructionsif this message is no longer needed.CHANGEEXITMENU MENU
