Panasonic PT-DZ870U Operating Instructions Manual

Contents

Panasonic PT-DZ870U Operating Instructions Manual Manual pdf 120 page image

Chapter 4 Settings — [PROJECTOR SETUP] menu120 - ENGLISH[SIGNAL FREQUENCY] Displays the frequency of the input signal.[PROJECTOR RUNTIME] Displays the operation times of the projector.[LAMP1] *3 Displays the runtime and status of Lamp 1.[LAMP2] *3 Displays the runtime and status of Lamp 2.[INTAKE AIR TEMP.]*2 Displays the status of the air intake temperature of the projector.[OPTICS MODULE TEMP.] *2 Displays the status of the internal temperature of the projector.[AROUND LAMP TEMP.] *2 Displays the status of the temperature around the lamps of the projector.[PROJECTOR TYPE] Displays the type of the projector.[SERIAL NUMBER] Displays the serial number of the projector.[LAMP UNIT MODEL NO.] Displays the model no. of the lamp unit.[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.[MAIN VERSION] Displays the main version of the firmware of the projector.[SUB VERSION] Displays the sub version of the firmware of the projector.[UPGRADE(ET-UK20)]*1 Displays the activation status based on the Upgrade Kit.[ON COUNT][POWER ON TIMES] Displays the number of times the power is turned on.[LAMP1 ON] Displays the number of times the lamp is turned on.[LAMP2 ON][SHUTTER] Displays the number of times the shutter is closed.[LAMP1] Displays runtime in detail.[LAMP2] Displays runtime in detail.[NUMBER OF REGISTEREDSIGNAL] Displays the number of registered signals.[REMOTE2 STATUS] Displays the control status of the REMOTE2.[AC VOLTAGE] Displays the status of the AC voltage.[COOLING CONDITION] Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.[SIGNAL INFORMATION][MEMORY NO.] Displays the memory number of the input signal.[INPUT] Displays the input terminal currently selected.[SIGNAL NAME] Displays the input signal name.[SIGNAL FREQUENCY] Displays the frequency of the input signal.[SYNC.STATE] Displays the synch polarity of the input signal.[V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal.[SCAN TYPE] Displays the scan type of the input signal.[TOTAL DOTS] Displays the total dot count of the input signal.[DISPLAY DOTS] Displays the number of input signal display dots.[TOTAL LINES] Displays the total line count of the input signal.[DISPLAY LINES] Displays the number of input signal display lines.[SAMPLING] Displays the sampling information of the input signal.[SIGNAL LEVEL] Displays the signal level of the input signal.[BIT DEPTH]*1 Displays the gradation of the input signal.*1 Only for PT-DZ870U*2 The temperature status is displayed with text color (green/yellow/red) and bar scale. Use the projector within the indication in green.*3 The lamp runtime to be displayed is real time. The following conversion is required to calculate the rough estimate for lamp replacement.Formula for lamp replacement time (rough estimate)(A x 4 + B x 3) ÷ 4f A: Runtime when [LAMP POWER] is set to [NORMAL]f B: Runtime when [LAMP POWER] is set to [ECO]The formula when the optional Replacement lamp unit (for portrait mode) is used is:(A x 13 + B x 10) ÷ 13Notef The content of status can be sent via E-mail by pressing the button while displaying the [STATUS] screen.f Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.[NO SIGNAL SHUT-OFF]A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. Thetime before switching to standby can be set.1) Press as to select [NO SIGNAL SHUT-OFF].